12
Part Names and Functions
P
Note:
To ensure safe operation, please observe the following precautions:
– Do not bend, drop, or expose the remote control to moisture or heat.
– For cleaning, use a soft dry cloth. Do not apply benzene, thinner, spray,
or any chemical material.
Remote Control
AUTO SET button
Execute the setting of Auto setup (includes Input search, Auto PC adj.
and Auto Keystone functions) in the setting menu.
(pp.24, 46)
S-VIDEO button
Select the S-VIDEO input source. (p.38)
Point
buttons
– Select an item or adjust the value in the On-Screen Menu. (p.22)
– Pan the image in the Digital zoom +/- mode. (p.37)
MUTE button
Mute the sound. (p.25)
SCREEN button
Select a screen mode. (pp.27, 36, 44)
P-TIMER button
Operate the P-timer function. (p.27)
NO SHOW button
Temporarily turn off the image on the screen. (p.27)
LAMP button
Select a lamp mode. (pp.26, 56)
KEYSTONE button
Correct keystone distortion. (pp.24, 47)
SELECT button
– Execute the selected item. (p.22)
– Expand or compress the image in Digital zoom mode. (p.37)
MENU button
Open or close the On-Screen Menu. (p.22)
FREEZE button
Freeze the picture on the screen. (p.26)
VOLUME +/- buttons
Adjust the volume level. (p.25)
ON/STAND-BY button
Turn the projector on or off. (pp.19-21)
COMPUTER 1/2 buttons
Select the COMPUTER 1 or COMPUTER 2 input source. (pp.28-29, 39)
D.ZOOM buttons
Zoom in and out the images. (pp.26, 37)
IMAGE button
Select the image mode. (pp.27,34, 41)
COMPONENT button
Select the COMPONENT input source. (p.39)
VIDEO button
Select the VIDEO input source. (p.38)
INFO. button
Operate the information function. (p.61)
HDMI button
Select the HDMI input source. (pp.26, 51)
PIP button
Operate the Picture In Picture function. (pp.26, 52)
To Next Page
Loading...
Need help?
General
Weight and Dimensions
