EasyManuals Logo

Sanyo PLC-WU3800 User Manual

Sanyo PLC-WU3800
85 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #45 background imageLoading...
Page #45 background image
44
Video Input
This projector has the picture screen resize function, which enables you to customize the image size.
Normal
Screen Size Adjustment
Screen Menu
1
2
Provide the image to fit the screen size while maintaining
the aspect ratio of input signal.
Custom
Adjust the screen scale and position manually with this
function.
Press the Point  button at Custom and the Custom is
displayed on the screen, you can use the Point  buttons
to choose the item you want to adjust.
Scale H/V .......... Adjust the Horizontal/Vertical screen
scale.
H&V ................... When set to On, the aspect ratio is fixed.
Scale V appears dimmed and becomes
unavailable. Adjust the Scale H, then the
screen scale is automatically modified
based on the aspect ratio.
Position H/V.....Adjust the Horizontal/Vertical screen
position.
Common ........... Save the adjusted scale to all the inputs.
Press the SELECT button at Common
to display a confirmation box. To save
the scale, press the SELECT button
at Yes, When Custom is selected, the
saved scale is used.
Reset ................. Reset the all adjusted values. Press
the SELECT button at Reset to display
a confirmation box. To reset, press the
SELECT button at Yes.
P
Note:
When no signal is detected, Normal is
set automatically and the Aspect dialog
box disappears.
The adjustable range for Scale H/V and
Position H/V is limited depending on the
input signal.
Wide, Zoom and Natural wide cannot
be operated when 720p, 1035i or 1080i
is selected in the AV System Menu
(p.40).
Wide
Provide the image at the 16:9 wide screen ratio.
Press the MENU button to display the On-Screen
Menu. Use the Point  buttons to select Screen and
then press the Point or SELECT button
Use the Point  buttons select the desired item and
then press the SELECT button.
Full
Provide the full screen image.
Zoom
Pan the horizontal direction of the image and cut the vertical
direction of the image to fit the screen size (16:9). Only for
4:3 video aspect ratio signals.
Natural wide
Modify the 4:3 aspect ratio image to fit the screen size(16:9
aspect ratio) by stretching the image to make it look natural.

Table of Contents

Other manuals for Sanyo PLC-WU3800

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sanyo PLC-WU3800 and is the answer not in the manual?

Sanyo PLC-WU3800 Specifications

General IconGeneral
Matrix size0.59 \
Projection distance0.99 - 12.1 m
Vertical scan range50 - 100 Hz
Horizontal scan range15 - 100 kHz
Projection technologyLCD
Contrast ratio (typical)500:1
Screen size compatibility40 - 300 \
Projector native resolutionWXGA (1280x800)
Keystone correction, vertical±40 °
Audio input2
Aspect ratio16:10
Network readyYes
Power supply typeAC
Dimensions (WxDxH)335.7 x 257.5 x 93.6 mm
Connectivity technologyWired
FocusManual
Digital zoom16 x
Focal length range19.2 - 30.2 mm
Noise level35 dB
Noise level (economic mode)31 dB
Dot clock scanning frequency140 MHz
Lamp typeNSHA
Lamp power275 W
Light source typeLamp
Service life of light source2500 h
Service life of light source (economic mode)3000 h
DVI portNo
Composite video in-
Serial interface typeRS-232
USB 2.0 ports quantity0
Supported video modes1080i, 1080p, 720p
Analog signal format systemNTSC, NTSC 4.43, PAL, PAL M, PAL N, SECAM
Supported graphics resolutions1024 x 768 (XGA), 1280 x 1024 (SXGA), 1280 x 800 (WXGA), 1400 x 1050 (SXGA+), 1600 x 1200 (UXGA), 1920 x 1200 (WUXGA), 640 x 480 (VGA), 800 x 600 (SVGA)
Product colorWhite
AC input voltage100 - 240 V
Power consumption (standby)0.7 W
Power consumption (typical)317 W
Power consumption (PowerSave)280 W
Cables includedVGA
Weight and Dimensions IconWeight and Dimensions
Depth257.5 mm
Width335.7 mm
Height93.6 mm
Weight3500 g

Related product manuals