23
Main Menu
For detailed functions of each menu, see “Menu Tree” on pages 71-72.
Basic Operation
j
k
l
m
n
o
p
q
Main Menu
Sub-Menu
r
s
l Image select
For computer source, used to select an image mode among Dynamic, Standard, Real, Blackboard(Green), Colorboard
and image 1 - 4 (p.34).
For HDMI or Video source, used to select an image mode among Dynamic, Standard, Cinema, Blackboard(Green) ,
Colorboard and Image 1- 4 (p.41).
m
Image adjust
For computer source, used to adjust computer image [Contrast, Brightness, Color temp., White balance (R/G/B),
Sharpness and Gamma] (pp.35-36).
For HDMI or Video source, used to adjust picture image [Contrast, Brightness, Color, Tint, Color temp., White
balance (R/G/B), Sharpness, Gamma, Noise reduction and Progressive] (pp.42-43).
k PC adjust
Select Fine sync, Total dots, Horizontal, Vertical, Clamp, Display area H and Display area V to adjust the
parameters to match with the PC input signal format (p.31-33).
n
Screen
For computer source, used to adjust size of the image [ Normal, True, Full, Custom and Digital zoom +/–] (pp.36-37).
For HDMI or Video source, used to set size of image [Normal, Full, Zoom, Wide, Natural wide and Custom] (p.44).
j Input
Used to select an input source from Computer 1, Computer 2, HDMI, Video, or S-video (pp.28-29,38-39).
o Sound
Used to adjust the volume or mute the sound (p.25).
q Information
Display the input source information: Input , H-sync freq., V-sync freq., Screen, Language, Lamp status, Lamp
counter, Power management, Key lock, PIN code lock and Remote control (p.61).
s Guide
The key operation is displayed.
p
Setting
Used to set the projector’s operating configurations (pp.45-60).
r Network
See the owner’s manual of “Network Set-up and Operation”.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
