69
Appendix
– Check PC adjustment or Screen and adjust them.
See pages 32-33, 36-37 .
–PIN code lock is being set. Enter a PIN code ("1234" or numbers
you have set). See pages 20, 57-58.
– Check the batteries.
– Make sure no obstruction is between the projector and remote
control.
– Make sure you are not too far from the projector when using the
remote control. Maximum operating range is 16.4'(5 m).
– Make sure the code of the remote control is conformed to the
projector’s code. See page 56.
– Unlock the Key lock function for the remote control function. See
page 56.
– Check the status of the projector with referring to "Indicators and
projector Condition". See page 73.
– Your operation is invalid. Operate correctly.
– The top control is not available if the top control is locked at Key lock
under Security of Setting section. See page 57.
– Contact the dealer where you purchased the projector or the service
center.
The image is distorted or runs off.
PIN code dialog box appears at
start-up.
The Remote Control does not work.
Indicator blinks or lights.
The exclamation mark appears on
the screen.
Top control does not work.
Unable to unlock the Logo PIN code
lock, Security key lock or Security
PIN code lock.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
