Sanyo PLC-WXU700 - Top Control

11
Part Names and Functions
Top Control
⑩ LAMP REPLACE indicator
 Lightsyellowwhentheprojectionlampreachesits
endoflife(pp.67,75).
⑥ WARNING indicator
 –Lightsredwhentheprojectordetectsanabnormal
condition.
 –Blinksredwhentheinternaltemperatureofthe
projectorexceedstheoperatingrange(pp.64,75).
⑨ ON/STAND–BY button
Turntheprojectoronoroff(pp.21-23).
⑤ POWER indicator
 –Lightsredwhentheprojectorisinstand-bymode.
 –Lightsgreenduringoperations.
 –BlinksgreeninthePowermanagementmode
(p.56).
⑧ INPUT button
Selectaninputsource(pp.30-31,40-41).
③ MENU button
 OpenorclosetheOn-ScreenMenu(p.24).
② POINT ▲▼◄► (VOLUME +/–) buttons
 –SelectanitemoradjustthevalueintheOn-Screen
Menu(p.24).
 –PantheimageintheDigitalzoom+mode(p.39).
 –Adjustthevolumelevel(Point
◄►buttons)(p.27).
④ AUTO SETUP/CANCEL button
 –Correctverticalkeystonedistortionandadjust
computerdisplayparameterssuchas
Fine sync,
Total dots,Horizontal andVerticalposition
(pp.26,48).
 –DisplaytheimageinUSBthumbdriveorreturnto
themenubarinMemoryViewermenu.
 Refertotheowner'smanualof"Memory
Viewerfunction".
① SELECT button
 –Executetheselecteditem(p.24).
 –ExpandorcompresstheimageintheDigitalzoom
mode(p.39).
①
②
③
④
⑤
⑥
⑦
⑧
⑨
⑩
⑦ KEYSTONE button
Correctkeystonedistortion(pp.26,49).