Sanyo PLC-WXU700 - Menu Bar

25
Menu Bar
Fordetailedfunctionsofeachmenu,see“MenuTree”onpages73-74.
Basic Operation








MainMenu
Sub-Menu


 Image select
 Forcomputersource,usedtoselectanimagemodeamongDynamic,Standard,Real,Blackboard(Green),Colorboard
and image 1 - 4(p.36).
ForHDMIorVideosource,usedtoselectanimagemodeamong
Dynamic,Standard,Cinema,Blackboard(Green) ,
Colorboard andImage 1- 4(p.43).

Image adjust
 Forcomputersource,usedtoadjustcomputerimage[
Contrast,Brightness,Color temp.,White balance (R/G/B),
SharpnessandGamma](pp.37-38).
ForHDMIorVideosource,usedtoadjustpictureimage[
Contrast,Brightness,Color, Tint,Color temp.,White
balance (R/G/B),Sharpness,Gamma,Noise reductionandProgressive](pp.44-45).
 PC adjust
 SelectFine sync,Total dots,Horizontal,Vertical,Clamp,Display area HandDisplay area Vtoadjustthe
parameterstomatchwiththePCinputsignalformat(p.32-35).

Screen
 Forcomputersource,usedtoadjustsizeoftheimage[
Normal,True,Full,CustomandDigital zoom +/–](pp.38-39).
ForHDMIorVideosource,usedtoUsedtosetsizeofimage[
Normal,Full, Zoom,Wide,Natural wideandCustom](p.46).
 Input
 Usedtoselectaninputsourcefrom
Computer 1,Computer 2,HDMI, Video, S-videoorNetwork(pp.30-31,40-41).
 Sound
 Usedtoadjustthevolumeormutethesound(p.27).
 Information
 Displaytheinputsourceinformation: Input,H-sync freq.,V-sync freq.,Screen,Language,Lamp status,Lamp
counter,Power management,Key lock,PIN code lockandRemote control(p.63).
 Guide
 Thekeyoperationisdisplayed.

Setting
Usedtosettheprojector’soperatingconfigurations(pp.47-62).
 Network
 Seetheowner’smanualof“NetworkSet-upandOperation”.