Sanyo PLC-WXU700 - Video System Selection

42
Video Input
Video System Selection
1
AV System Menu (Video or S-video)
AV System Menu (Component)
2
Iftheprojectorcannotreproducepropervideoimage,
selectaspecificbroadcastsignalformatfromamongPAL,
SECAM, NTSC,NTSC 4.43,PAL-Mand PAL-N.
PAL/SECAM/NTSC/NTSC4.43/PAL-M/PAL-N
Theprojectorautomaticallydetectsanincomingvideo
signal,andadjustsitselftooptimizeitsperformance.
Iftheprojectorcannotreproducepropervideoimage,select
aspecificcomponentvideosignalformatamong480i, 575i,
480p,575p, 720p, 1035iand1080i.
Auto
COMPONENT VIDEO SIGNAL FORMAT
Video or S-video
Component
Theprojectorautomaticallydetectsanincomingvideo
system,andadjustsitselftooptimizeitsperformance.
WhenVideoSystemisPAL-MorPAL-N,selectthesystem
manually.
Auto
Note:
TheAVSystemMenucannotbeselectedwhenselecting
RGB (Scart).
HDMI
Video
S-video
Network Wired 1
Video
Component
PresstheMENUbuttontodisplaytheOn-Screen
Menu.UsethePoint▲▼buttonstoselectInputand
thenpressthePoint►ortheSELECTbutton.
UsethePoint
▲▼buttonstoselectVideo,S-video
orComputer 1(Component)andthenpressthe
SELECTbutton.
3
UsethePoint▲▼buttonstoselectSystemandthen
pressthePoint►orSELECTbutton.UsethePoint▲
▼buttonstoselectthedesiredsystemandthenpress
SELECTbutton.