Sanyo PLC-WXU700 - Auto PC Adjustment

33
Computer Input
AutoPCadjustmentfunctionisprovidedtoautomaticallyadjustFine sync,Total dots,Horizontal,Vertical,
Clamp,Display area H andDisplay area V positionstoconformtoyourcomputer.
PC adjust Menu
Auto PC adjustment
To store adjustment parameters
TheadjustedparametersfromtheAutoPCadjustmentcan
bestoredintheprojector.Oncetheparametersarestored,
thesettingcanbedonejustbyselectingaMode (1–5)in
thePCSystemMenu(seepage32).SeealsoStore on
page35.
Note:
 •Fine sync,Total dots,HorizontalandVertical
positionofsomecomputerscannotbefullyadjusted
withtheAutoPCadjustmentfunction.Whentheimage
isnotprovidedproperlywiththisoperation,manual
adjustmentsarerequired(pp.34-35).
 •TheAutoPCadjustmentcannotbeoperatedwhen480i,
575i, 480p, 575p, 720p, 1035ior1080iisselected
inthePCSystemMenu(p.32),orwhenthesignalis
comingfromtheHDMIterminal.
PresstheMENUbuttontodisplaytheOn-Screen
Menu.UsethePoint▲▼buttonstoselectPC adjust
andthenpressthePoint►ortheSELECTbutton.
1
2
UsethePoint▲▼buttonstoselectAuto PC adj.and
thenpresstheSELECTbutton.
Auto PC adj.
Menu Operation
UsePoint▲▼buttonstoselectAuto
PC adj.andpresstheSELECTbutton.
Please wait...appearswhiletheAutoPC
adjustmentisinprocess.