Sanyo PLC-WXU700 - Zoom and Focus Adjustment; Auto Setup Function; Keystone Correction

26
Basic Operation
RotatetheZoomLevertozoominandout.
RotatetheFocusRingtoadjustthefocusoftheimage.
Zoom and Focus Adjustment
Ifaprojectedpicturestillhaskeystonedistortionafter
pressingtheAUTOSETUP/CANCELbuttononthetop
controlortheAUTOSET/CANCELbuttonontheremote
control,correcttheimagemanuallyasfollows:
PresstheKEYSTONEbuttonontheremotecontrol.The
Keystonedialogboxappears.UsethePoint▲▼buttonsto
correctkeystonedistortion.Thekeystoneadjustmentcanbe
stored(seepage49).
Reducetheupperwidth
withthePoint
▲button.
Reducethelowerwidth
withthePoint▼button.
•Thewhitearrowsindicatethatthereisno
correction.
•Aredarrowindicatesthedirectionofcorrection.
•Anarrowdisappearsatthemaximumcorrection.
•IfyoupresstheKEYSTONEbuttononthe
remotecontroloncemorewhilethekeystone
dialogboxisbeingdisplayed,thekeystone
adjustmentwillbecanceled.
•Theadjustablerangeislimiteddependingonthe
inputsignal.
Keystone Correction
Remote Control
Autosetupfunctionisprovidedtoautomaticallyexecute
thesettingofAutosetup(includesInputsearch,AutoPC
adj.andAutoKeystonefunctions)inthesettingmenuby
justpressingtheAUTOSETUP/CANCELbuttononthetop
controlortheAUTOSET/CANCELbuttonontheremote
control.Refertopage48forthesettingoftheAutosetup
function.
Note:
 •AutoKeystonecorrectsverticaldistortiononly;itdoes
notcorrecthorizontaldistortion.
 •AutoKeystonecannotworkwhenCeilingfeatureisset
to
OnintheSettingmenu(p.53).
 •Perfectcorrectionoftheimagedistortioncannotbe
ensuredwiththeAutosetupfunction.Ifthedistortion
cannotbecorrectedproperlybypressingtheAUTO
SETUP/CANCELorAUTOSET/CANCELbutton,adjust
manuallybypressingtheKEYSTONEbuttononthe
remotecontrolorselectingKeystoneintheSetting
menu(p.49).
 •Fine sync,Total dots,Horizontal andVertical
positionofsomecomputerscannotbefullyadjusted
withtheAutoPCadjustmentfunction.Whentheimage
isnotprovidedproperlywiththisoperation,manual
adjustmentsarerequired(pp.34-35).
Auto Setup Function
Top Control
AUTO SET/CANCEL button
POINT ▲▼buttons
KEYSTONE button
POINT ▲▼buttons
ZoomLever
FocusRing
AUTO SETUP/CANCEL button