Sanyo PLC-WXU700 - Remote Control

12
Part Names and Functions
㉘ NETWORK button

SelecttheNetworkinput.Seetheowner'smanualof“NetworkSet-upand
Operation”andowner'smanualof"Memoryviewerfunction".
Note:
Toensuresafeoperation,pleaseobservethe
followingprecautions:
– Donotbend,drop,orexposetheremotecontrolto
moistureorheat.
– Forcleaning,useasoftdrycloth.Donotapply
benzene,thinner,spray,oranychemicalmaterial.
Remote Control
①
⑧
⑮
⑪
⑤ ②
⑨
⑩
⑭
⑰
⑥
⑦
⑫
⑬
⑯
④
② ON/STAND-BY button
 Turntheprojectoronoroff.(pp.21-23)
⑥ HDMI button
 SelecttheHDMIinputsource.(pp.28,41)
⑦COMPUTER button
 SelecttheCOMPUTERinputsource.(pp.30-31,41)
⑭PAGE ▲▼buttons
Scrollbackandforththepagesonthescreenwhengivingapresentation.Touse
thesebuttons,connecttheprojectorandyourcomputerwithaUSBcable.(pp.10,
17)
⑧INFO. button
 Operatetheinformationfunction.(p.63)
⑯D.ZOOM +/-buttons
 Zoominandouttheimages.(pp.28,39)
⑪ MENU button
 OpenorclosetheOn-ScreenMenu.(p.24)
⑰RESET/ON/ALL-OFF switch
 Whenusingtheremotecontrol,setthisswitchto“ON.”Setitto“ALLOFF”for
powersavingwhenitisnotused.Slidethisswitchto“RESET”toinitializethe
remotecontrolcodeorswitchSpotlightandPointertotheLaserpointerfunction.
(pp.13-14)
⑳IMAGE button
 Selecttheimagemode.(pp.29,36,43)
㉑
MUTE button
 Mutethesound.(p.27)
⑨
KEYSTONE button
 Correctkeystonedistortion.(pp.26,49)
⑩Point ▲▼◄►(VOLUME
+/–
)
buttons
 –SelectanitemoradjustthevalueintheOn-ScreenMenu.(p.24)
 –PantheimageintheDigitalzoom+mode.(p.39)
 –Adjustthevolumelevel.(Point
◄►buttons)(p.27)
㉓
NO SHOW button
 Temporarilyturnofftheimageonthescreen.(p.29)
⑬ LASER button
 –OperatetheLaserpointerfunction.Laserbeamisemittedwhilepressingthis
buttonwithin1minute.Whenusingthislaserpointerformorethan1minute,
releasetheLASERbuttonandpressitagain.(p.14)
 –DisplaythePointeronthescreen.(p.14)
① L-CLICK button
Actastheleftmousebuttonforwirelessmouse
operation.(p.15)
④ SIGNAL EMISSION indicator
Lightsredwhilethelaserbeamisbeingemitted
fromthelaserlightwindoworasignalisbeingsent
fromtheremotecontroltotheprojector.
⑫FREEZE button
 Freezethepictureonthescreen.(p.28)
⑮ LAMP button
 Selectalampmode.(pp.28,58)
㉒
P-TIMER button
 OperatetheP-timerfunction.(p.29)
㉔R-CLICK button
 Actastherightmousebuttonforwirelessmouseoperation.(p.15)
㉕ SELECT button
 –Executetheselecteditem.(p.24)
 – ExpandorcompresstheimageinDigitalzoommode.(p.39)
㉖PRESENTATION POINTER button
Moveapointeroftheprojectororapointerforwirelessmouseoperation.(pp.14-15)
㉗AUTO SET/CANCEL button
–Correctverticalkeystonedistortionandadjustcomputerdisplayparameterssuch
as
Fine sync,Total dots,Horizontal andVerticalposition.(pp.26,48)
–DisplaytheimageinUSBthumbdriveorreturntothemenubarinMemory
Viewermenu.
Refertotheowner'smanualof"Memoryviewerfunction".
⑤ LASER LIGHT window
Alaserbeamisemittedfromhere(p.14).
⑲SCREEN button
 Selectascreenmode.(pp.29,38-39,46)
㉙ VIDEO button
 SelecttheVIDEOinputsource.(pp.28,40)
⑱PIP button
 OperatethePictureInPicturefunction.(pp.28,55)
㉑
㉒
㉔
⑳
㉓
㉕
㉖
㉗
㉘
⑱
⑲
㉙
③
③ WIRED REMOTE jack
Connecttheremotecontrolcable(notsupplied)
tothisjackwhenusingasawiredremotecontrol.
Wirelessremotecontroldoesnotworkwhenthe
remotecontrolcableisconnectedtotheprojector.