Sanyo PLC-WXU700 - Video Input; Input Source Selection (Video, S-Video)

40
ChooseVideoorS-videobypressingtheINPUTbuttonon
thetopcontrolortheVIDEObuttonontheremotecontrol.
1
2
Video
Input Menu
Input Source Selection (Video, S-video)
Video Input
Direct Operation
Menu Operation
Whenvideoinputsignalisconnectedtothe
VIDEOjack,selectVideo.
Video
WhenvideoinputsignalisconnectedtotheS-
VIDEOjack,selectS-video.
S-video
Note:
 •Network is for the Network function. See the owner’s
manualof“NetworkSet-upandOperation”.
 •WhentheInputSearchfunctionissettoOn1orOn2in
theAutosetupfunction,theinputsignalwillbesearched
automatically(p.48).
Top Control
INPUT button
Remote Control
VIDEO button
PresstheMENUbuttontodisplaytheOn-Screen
Menu.UsethePoint▲▼buttonstoselectInputand
thenpressthePoint►ortheSELECTbutton.
UsethePoint
▲▼buttonstoselecteitherVideoor
S-videoandthenpresstheSELECTbutton.
Video
S-video
Computer 1
HDMI
Computer 2

S-video
Network
Video

COMPUTER 2cannotbeselectedwhenusingthe
COMPUTERIN2/MONITOROUTterminalas
MONITOROUToutput.