Sanyo PLC-WXU700 - Page 40

39
Computer Input
SelectDigital zoom +.TheOn-ScreenMenudisappearsand
D. zoom +appears.PresstheSELECTbuttontoexpandthe
imagesize.UsethePoint▲▼◄►buttonstopantheimage.
ThePanningfunctioncanworkonlywhentheimageislarger
thanthescreensize.
A projected image can be also expanded by pressing the
D.ZOOM+buttonontheremotecontrol.
ToexittheDigitalzoom+/–mode,pressanybuttonexcept
theD.ZOOM
+/-buttons,SELECTandPointbuttons.
Digital zoom +
SelectDigital zoom -.TheOn-ScreenMenudisappears
andD. zoom –appears.PresstheSELECTbuttonto
compressimagesize.
Theprojectedimagecanbealsocompressedbypressing
theD.ZOOM-buttonontheremotecontrol.
Digital zoom -
Toreturn to theprevious screen size,select a screen size
from the Screen SizeAdjustment Menu or select an input
source from the Input Source Selection Menu (see pages
30-31)againoradjustthescreensizewiththeD.ZOOM
+/-
buttons.
For zooming in and out the images
Note:
 •Thepanningfunctionmaynotoperateproperlyif
thestoredModeinthePCadjustMenuisused
(p.35).
•Theminimumcompressionratioislimited
dependingontheinputsignal,whenthe
Keystonefunctionisworkingorwhenthe
customisselectedforthescreensize.
 •True,FullandDigital zoom +/–cannotbe
selectedwhen480i,575i,480por575pis
selectedinthePCSystemMenu(p.32).
 •Digital zoom +/- cannotbeselectedwhenFull
orTrueisselected.
•WhenCustomisselected,theDigitalzoom-
functionisdisabled.
Remote Control
D.ZOOM + button
POINT buttons
SELECT button
D.ZOOM - button
Adjust the screen scale and position manually with this
function.
PressthePoint►buttonatCustomandthe Customis
displayedonthescreen,youcanusethePoint▲▼buttons
tochoosetheitemyouwanttoadjust.
 Scale H/V.......... AdjusttheHorizontal/Verticalscreen
scale.
 H&V................... WhensettoOn,theaspectratioisfixed.
Scale V appears dimmed and becomes
unavailable.Adjust Scale H, then the
screen scale is automatically modified
basedontheaspectratio.
 Position H/V..... Adjust the Horizontal/Vertical screen
position.
 Common........... Savetheadjustedscaletoalltheinputs.
PresstheSELECTbuttonatCommonto
display a confirmation box. To save the
scale,presstheSELECTbuttonatYes.
When Custom is selected, the saved
scaleisused.
 Reset................. Reset the all adjusted values. Press
the SELECT button at Reset to display
a confirmation box. To reset, press the
SELECTbuttonatYes.
Custom
Note:
 •Whennosignalisdetected,
Normalisset
automaticallyandtheAspectdialogbox
disappears.
 •TheadjustablerangeforScale H/Vand
Position H/Vislimiteddependingontheinput
signal.