Sanyo PLC-WXU700 - Page 61

60
Setting
UsethePoint▲▼buttonstoselectOff,On1orOn2.
PresstheSELECTbuttontoclosethedialogbox.
Change the PIN code lock setting
Enter a PIN code
UsethePoint▲▼buttonstoenteranumber.Pressthe
Point►buttontofixthenumberandmovetheredframe
pointertothenextbox.Thenumberchangesto.If
youfixedanincorrectnumber,usethePoint◄buttonto
movethepointertothenumberyouwanttocorrect,and
thenenterthecorrectnumber.
Repeatthissteptocompleteenteringafour-digit
number.
Afterenteringthefour-digitnumber,movethepointerto
Set.PresstheSELECTbuttonsothatyoucanstartto
operatetheprojector.
IfyouenteredanincorrectPINcode,PIN codeandthe
number()willturnredforamoment.Enterthe
correctPINcodealloveragain.
Enter a PIN code
ThePINcodecanbechangedtoyourdesiredfour-
digitnumber.PressthePoint▼buttontoselectPIN
code changeandpresstheSELECTbutton.TheNew
PINcodeinputdialogboxappears.SetanewPINcode.
Change the PIN code
CAUTION:
WHEN YOU HAVE CHANGED THE PIN CODE, WRITE
DOWN THE NEW PIN CODE IN COLUMN OF THE
PIN CODE NO. MEMO ON PAGE 83, AND KEEP IT
SECURELY. IF YOU FORGET YOUR PIN CODE, THE
PROJECTOR CAN NO LONGER BE STARTED.
Off
PIN code change