Sanyo PLC-WXU700 - Page 63

62
Setting
Factory default
ThisfunctionreturnsallsettingvaluesexceptfortheUser
logo,PIN code lock,Logo PIN code lockandFilter
countertothefactorydefaultsettings.
Factory default
Warning log
Thisfunctionrecordsanomalousoperationswhilethe
projectorisinoperationanduseitwhendiagnosingfaults.
Upto10warninglogsaredisplayedwiththelatestwarning
messageatthetopofthelist,followedbypreviouswarning
messagesinchronologicalorder.
Note:
 WhentheFactorydefaultfunctionisexecuted,allthe
warninglogrecordswillbedeleted.
Thisfunctionisusedtosetafrequencyforthefilter
cleaning.
Whentheprojectorreachedaspecifiedtimebetween
cleanings,aFilterwarningiconappearsonthescreen,
notifyingthecleaningisnecessary.Aftercleaningthefilter,
besuretoselectResetandsetthetimer.TheFilterwarning
iconwillnotturnoffuntilthefiltercounterisreset.
Fordetailsaboutresettingthetimer,referto"Resettingthe
FilterCounter"onpage65.
Filter counter
Filter counter
32H
PresstheSELECTbuttontoselectTimerand
thenusethePoint
▲▼buttonstosetthetimer.
Selectfrom(Off/100H/ 200H/ 300H)depending
ontheuseenvironment.
Filterwarningiconappearsonthescreenatasettime.
Fig.1Filterwarningicon
Note:
 Thisiconalsoappearsatturningon.
Note:
 TheFilterwarningicon(Fig.1)willnotappearwhen
theDisplayfunctionissetto
Off (p.49),during
“Freeze”(p.28),or"Noshow"(p.29).