Sartorius Cubis Series Operating Instructions

Data Interfaces
Cubis MSE Operating Instructions 65
Installation Guides for Windows XP
®
, Windows Vista
®
and Windows 7
®
and Windows 8
®
Changing the Port Number If you use the USB interface with a program that limits the number of COM port
designations (e� g�, only COM1, 2, 3, 4), you may have to assign one of these port
numbers to the new virtual port�
t Open the setting for the USB serial port in the Windows® Control Panel:
– START > My Computer > Control Panel
– System > Hardware > Device Manager
t Open the Connections submenu�
t Double-click on USB Serial Port�
t Select Port Settings > Advanced�
Changing Latency Time t Open the settings for the USB serial port, following the above instructions�
t For a faster rate of communication, change the setting for the latency timer to
1msec�
Plug & Play Mode in Autoprint (SBI) t Open the settings for the USB serial port, following the above instructions�
t Stop the Plug & Play mode from running�
Uninstalling the Driver
The software driver for the USB connection can be uninstalled with the Windows®
Uninstaller�

Sartorius Cubis Series Specifications

General

Display	Color touch screen
Readability	0.01 mg to 1 g
Interfaces	USB, Ethernet, RS-232
Calibration	Internal and external
Housing	Die-cast aluminum
Response Time	Varies by model
Pan Size	Varies by model
Operating Temperature	10°C to 30°C
Compliance	GLP
Power Supply	100 – 240 V, 50/60 Hz
Capacity	Varies by model (up to 64 kg)
Repeatability	Varies by model
Linearity	Varies by model