Data interface YDO05
(overvoltage protection from ±60 V max.)
“SartoWedge” data transfer software program YSW 01
enables you to have data, recorded by your balance, input
directly into any application program you are running on your
PC (e.g., Excel). Memory-resident software (5 KB) for all
IBM-compatible computers and balances that are equipped
with a serial interface. This applications kit includes the
following software and equipment:
– 3
1
⁄2“ or 5
1
⁄4“ program diskette
– interface cable
– manual
“BalanceReader” software YAK 10 PC-0002
for collecting data that are transmitted by your Sartorius
balance to a commercially available personal computer.
These data are read into spreadsheets and stored. The stored
spreadsheets can be further processed using commercially
available standard software (Excel, Lotus 1-2-3, etc.).
This applications kit includes the following software
and equipment:
– 3
1
⁄2“ and 5
1
⁄4“ program diskettes
– program description
– interface cable
– adapter (25-pin to 9-pin)
Antistatic pan YWP 01
Special weighing pan for AC balances;
device for magnetic samples YWP 02
Dust covers
– for AC balances 69 60AC01
– for LC balances with a round pan 69 60LC01
– for LC balances with a rectangular pan
and a capacity less than 12 kg 69 60LC02
– for LC balances with a capacity greater than 12 kg YDC 01 IC
Carrying cases
– for AC balances YDB 01 AC
– for LC balances with a round pan YDB 01 LC
– for LC balances with a rectangular pan
and a capacity less than 12 kg YDB 02 LC
6–31
To Next Page