Declarations of Conformity
The CE Mark on Sartorius Equipment
In 1985, the Council of the European Community
approved a resolution concerning a new approach to
technical harmonization and standardization of
national regulations. The organization for monitoring
compliance with the directives and standards
concerning the
C marking is governed in the
individual EU member states through the
implementation of the EC Directives adopted by the
respective national laws. As of December 1993,
the scope of validity for all EC Directives has been
extended to the Member States of the European Union
and the Signatories of the Agreement on the
European Economic Area.
Sartorius complies with the EC Directives and European
Standards in order to supply its international customers
with weighing instruments that feature the latest
advanced technology and provide long years of
trouble-free service.
The C mark may be affixed only to weighing
instruments and associated equipment that comply
with one of the applicable directives:
Council Directive 89/336/EEC “Electromagnetic
Compatibility (EMC)”
This Directive regulates the use of equipment that can
cause electromagnetic interference or whose
functioning can be influenced by such interference.
The safety requirements are:
– limitation of emissions
– defined immunity to interference
7–1
To Next Page
Loading...
Need help?
General