Balance Operating Menu
This Sartorius balance can do much more than “just weigh.”
It can “think” in various units of measure, adapt to unfavorable conditions and
process weight data for a variety of applications.
In the operating menu, you can define how your balance will adapt to ambient
conditions, and also how it will work to meet your special requirements.
For your convenience, the menu codes have been factory-set so that you normally
do not have to make any changes. If you have special operating conditions,
adjust the balance to your individual requirements by setting the menu codes of
your choice.
The factory-set menu codes are identified by an “*.” You can select the functions not
identified by an “*” by setting the respective menu code.
Don’t worry!
Even if you’ve selected the “wildest” codes and totally thrown off all the code
settings you need, all you have to do is press a key to set things straight again.
Your balance will work just like it did when it left the factory – with the original
factory-set menu codes.
Important Note for Verified Balances/Scales Approved for Use as Legal
Measuring Instruments in the EU:
The balance/scale operating menu can also be changed when the balance/
scale is being used as a legal measuring instrument (legal for trade). As a rule,
codes that are not permitted for operation of the balance/scale as a legal
measuring instrument
are blocked or not displayed. The operating menu on
verified balances/scales cannot be locked with the menu access switch
(“–” not displayed).
2–1
To Next Page
Loading...
Need help?
General