Data ID Codes
To help you identify weights, piece counts, percentages, etc., a code letter is
printed or displayed in front of these values. For example, an “N” printed or
displayed in front of a weight value identifies it as a net weight. If you set the code
for “without data ID code,” only net weights, results in percent and counting
results will be output. You will find the data ID codes of a particular application
program listed in the corresponding description. The ID code increases the data
output format for each weight readout from 16 to 22 characters.
ID code for data output Code
Without * 7 2 1
With ** 7 2 2
** = factory setting
** = factory setting for the IAC version
2–17
To Next Page
Loading...
Need help?
General