Specifications
Model MC 21S
Capacity g 21
Readability µg 1
Tare range (subtractive) g –21
Repeatability (standard deviation)* µg 2
Linearity µg ≤±15
Response time (average) s 10
Response time in IQ mode (0.01%) s ≤± 2.5
Adaptation to ambient conditions By selection of 1of 4 optimized filter levels
Display update
(depends on the filter level selected) s 0.1– 0.4
Operating temperature range K 278...313 (+5...+40°C)
Sensitivity drift within 278...313K /K ≤ 1·10
–6
Calibration weight internal
Allowable ambient temperature range °C +5°C...+40°C
AC power source/power requirements V~ Via AC adapter TNG6
230 or115, +15%...–20%
Frequency Hz 50–60
Power consumption (average) VA max.: 18.7, average: 11
Selectable weight units g, kg, ct, lb, oz, ozt, tlh, tls, tlt, GN, dwt, mg,
/lb, tlc, mom, K, tol, bat, MS
Weighing pan diameter mm 30
Maximum sample size mm 30x40
Net weight, housing, approx. kg 11
Housing dimensions (WxDxH) mm 219x408x318
Net weight, evaluation system, approx. kg 3.1
Evaluation system (WxDxH) mm 213x306x107
Built-in interface RS-232 C-S/V24-V28, RS423/V10; 7-bit;
parity: even, odd; mark, space;
Transmission rates: 150...19,200 baud;
1or 2 stop bits;
software/hardware handshake
Selectable application programs Mass unit conversion; “EUREKA” air buoyancy
correction progr.; diff. weighing and
backweighing;
density determination; tare
memory; net total; weighing in percent;
over/under checkweighing (classification
and filling); counting
Automatic zero tracking function
(can be turned off by menu code) Standard feature
* = standard deviation of repeatability according to German Industrial Standard (DIN) 1319, Section 3
5–2
To Next Page
Loading...
