Balance Operating Menu
The Sartorius MC 1 Balance can be adjusted to meet your special requirements;
e.g., to weigh in various units of measure, adapt to unfavorable conditions
and process weight data for a variety of applications.
In the operating menu, you can define how your balance will adapt to ambient
conditions, and also how it will work to meet your needs.
The factory-set menu codes are identified by an “*.” You can select the functions not
identified by an “*” by setting the respective menu code.
Important Note Concerning Verified Balances Approved for Use as Legal
Measuring Instruments:
The balance operating menu can also be changed when the balance is being
used as a legal measuring instrument. Codes that are not permitted for operation
of the balance as a legal measuring instrument are blocked or not displayed
as a rule. After verification, the balance operating menu cannot be locked with
the menu access switch (-L- not displayed).
2–1
To Next Page
Loading...
