Sartorius MC 210 S - Utilities for Printouts and Data Transfer; Data Output Parameters Configuration; Automatic Data Output Control

Utilities for Printouts or Data Transfer
The balance operating menu lets you define the various parameters for data output.
For information on the data formats and for interfacing a computer or a different
peripheral device, see part 4, “Interface Description.”
Data Output Parameter
This parameter is coupled with the stability parameter; stability =
stable readout or no motion is detected
Print on request = data is output only when the print key, p, is pressed
or a software command is received
Auto print = continuous, automatic data output
Code
Print on request regardless of stability 6 1 1
Print on request after stability, with storage of the function 6 1 2*
Print on request at stability, without storage of the function 6 1 3
Auto print regardless of stability 6 1 4
Auto print at stability 6 1 5
Automatic Data Output
You can stop and start automatic data output by pressing the print key, p.
Code
Start/stop auto print using the p key 6 2 1
Auto print not stoppable 6 2 2*
* = factory setting
2–18