Sartorius MC 210 S - Interface Parameter Settings; Baud Rate Configuration; Parity Settings; Stop Bits Configuration

Interface Parameter Settings
** = factory setting
**) = inaccessible on verified balances approved for use as legal measuring
instruments
Handshake Mode Code
Software handshake 5 4 1
Hardware handshake with 2 characters after CTS * 5 4 2
Hardware handshake with 1 character after CTS 5 4 3
Number of Stop Bits Code
1 stop bit * 5 3 1
2 stop bits 5 3 2
Parity Code
Mark parity ** 5 2 1
Space parity ** 5 2 2
Odd parity * 5 2 3
Even parity 5 2 4
Baud Rate Code
150 baud 5 1 1
300 baud 5 1 2
600 baud 5 1 3
1,200 baud * 5 1 4
2,400 baud 5 1 5
4,800 baud 5 1 6
9,600 baud 5 1 7
19,200 baud 5 1 8
4–16