Setting the ID No./Date/Time
– Turn the balance off
– Turn it back on
– Briefly press w when all segments are displayed
– Toggle among the identification number “
1d
,”
the date “
dAt
” and the time “
t1N
” using the f key
identified in the display by “^”
“ID No.for the ISO/GLP-compliant
Printout or Record”
Enter the ID number with 8 places maximum using
digits 0 through 9 and the “–” symbol. Zeros in front
of the decimal point will not be output. The decimal
points are output as “–” via the data interface.
– Enter ID number, e.g., 4.32.1
– Press F identified in the display by “STO”
to confirm the setting
2–30