Accessories (Options)
Data printer YDP 03-0CE
with date/time and statistics
functions – approved for legal
metrological verification
Print speed approx. lines/sec. 1.5
Printer housing (W x D x H)
in mm 150 x 138 x 43
in inches 5.9 x 5.4 x 1.7
Remote display (can be plugged
into the interface port)
– LCD, reflective YRD 12 Z
– LCD for overhead projectors,
transmissive YRD 13 Z
External rechargeable
battery pack YRB 05 Z
Approx.10 hours of operation;
rechargeable by power supply
(detailed information on additional
options for powering the balance
is available in our
Service Information bulletin 15/88)
Foot switch with T-connector, for
carrying out 3 functions:
open/close draft shield,
tare and print YPE 01RC
Important Note for Verified
Balances Approved for Use
as Legal Measuring Instruments
in Europe: The remote display
may not be connected when
the balance is being used as
a legal measuring instrument.
5–7
To Next Page
Loading...
