Declarations of Conformity
The C Mark on Sartorius Equipment
In 1985, the Council of the European Community
approved a resolution concerning a new approach to
the technical harmonization and standardization of
national regulations. The organization for monitoring
compliance with the directives and standards
concerning C marking is governed in the individual
EU Member States through the implementation of the
EC Directives adopted by the respective national
laws. As of December 1993, the scope of validity for
all EC Directives has been extended to the Member
States of the European Union and the Signatories
of the Agreement on the European Economic Area.
Sartorius complies with the EC Directives and
European Standards in order to supply its customers
with weighing instruments that feature the latest
advanced technology and provide many years of
trouble-free service.
The C mark may be affixed only to weighing
instruments and associated equipment that comply
with the following Directive:
Council Directive 89/336/EEC
“Electromagnetic Compatibility (EMC)”
This Directive regulates the use of equipment that can
cause electromagnetic interference or whose
functioning can be influenced by such interference.
Applicable European Standards:
Limitation EN 50081-1 Residential,
of emissions commercial
and light industry
EN 50081-2 Industrial
environment
Defined EN 50082-1 Residential,
immunity commercial
to interference and light industry
EN 50082-2 Industrial
environment
6–1
To Next Page
Loading...
Need help?
General