Key Functions
Key Function
c Clears a function
e Turns the balance on or off
l/r Opens draft shield towards left/right
i Displays info in an application prog.
w Toggles between weight units
and readability
t Zeros the display
f Quick-CAL/depends on the
application program selected
F Depends on the application
program selected
p Data output (print)
Brief Instructions for Sartorius Micro
for Standard Models and Models Verified
WMC6014-e98043
Simple Weighing
– Press l or r to open draft shield
– Place container on pan; then press t
– Press l or r to open draft shield
– Add sample to container
– Press l or r to close draft shield
– Wait until the stability symbol “g” or “mg”
is displayed; then read off weight
To adapt your balance to ambient
conditions and to your special requirements,
please set the appropriate codes in the
balance operating menu.
To Next Page
Loading...
