Please do not forget to relock the balance operating
menu. The “-L-” indicates that it is currently locked:
To use the locking function, make sure code 812
is set in the balance operating menu.
If code 811is set, the menu access switch will
not lock.
In this case, “-C-“ will be displayed whenever you
access the menu:
Undoing All Menu Code Changes – Reset Function
The reset function lets you undo all menu code
changes, which means that you will obtain the original
factory-set menu codes indicated by an “*” so that
your balance will operate according to them.
To use this function, you will need to select
code 9 – – 1
o
. See the previous pages for information
on confirming and storing a menu code setting.
The charts on the next pages give just a small
sampling of the code options available for
the balance operating menu. These options include
standard balance operating parameters, utilities
for printouts or data transfer and additional functions.
2–4
To Next Page
Loading...
