Data ID Codes
To help you identify weights, piece counts, percentages, etc., a code letter
is printed or displayed in front of these values.
For example, an “N” printed or displayed before a weight value identifies
it as a net weight. If you set the code for “without data ID code,” only net weights,
results in percent, and counting results will be output. The ID code increases the
data output format from 16 to 22 characters for each weight readout.
You will find the data ID codes of a particular application program listed
in the corresponding description.
ID code for data output Code
Without 7 2 1*
With 7 2 2
* = factory setting
2–20
To Next Page
Loading...
