After each weighing-in operation has been completed, the next memory location
is automatically selected. To proceed from weighing-in to backweighing, you must
select the corresponding memory location ID by entering the appropriate number
and pressing the F key.
Configure your weighing sequence according to your particular requirements:
Weighing sequence Code
For MC 210 S, For MC 5(-0CE),
MC 210 P, SC 2 (-0CE)
MC 410 S (-0CE) and MC 21 S
Individual weighing 3 7 1 3 6 1
Consecutive individual weighing 3 7 2* 3 6 2*
Combined weighing 3 7 3 3 6 3
* = factory setting
3–16
To Next Page
Loading...
