Satec EM133 User Manual

Chapter 5 Configuring the EM13X Series Configuring Meter Security
EM13x Series SMART MULTIFUNCTION METER 101
To change the password:
 Apply LONG PRESS on ENTER button to select the Passwrd 1 entry
 Apply SHORT PRESS on ENTER button to select the password digit to
change.
 Apply LONG PRESS on ENTER button to exit the Passwrd 1 digit field
 Apply LONG PRESS on ENTER button to exit the Passwrd 1 field to
move to Access field
The new password is effective for both the display and
communication ports.
Using PAS
Ensure that the On-line button on the PAS toolbar is checked, select
Administration from the Monitor menu, and then select Change
Password -> Password 1.
An Authorization Required dialog box will ask for
administrator password to access the Change Password
menu.
Figure 5-15: Password Setup Dialog Box
To change the password:
 Type in a new 8-digit password
 Repeat the password in the Confirm new password box
 Click Send
Access Passwrd 1
9
LONG PRESS
Access Passwrd 1
00000009
SHORT PRESS

Satec EM133 Specifications

General

Brand	Satec
Model	EM133
Category	Measuring Instruments
Language	English