Satec EM133 User Manual

Chapter 5 Configuring the EM13X Series General Meter Setup
96 EM13x Series SMART MULTIFUNCTION METER
Configuring the Display
This setup allows configuring the meter display. It also has an entry for
launching the meter Flash Loader.
Using the Front Display
Select the Disp entry from the main menu. See Viewing and Changing
Setup Options in Chapter 3 for information on configuring parameters
via the front display.
See Table 16 for the available options.
Table 16: Display Setup Options
Display
Label
Parameter
Options
Default
Description
AutuoScroll
Display update
rate
Disabled
2 – 30sec
5 sec
Defines the interval
between display updates
AutoReturn
Auto return to
the main screen
Disabled,
1 – 30 mn
5 mn
Enables automatic return to
the main display if no
buttons are pressed for 5
minutes
Backlight
Display
Backlight period
Continuous,
1 – 10 mn
1
Defines the display
backlight light on time
duration
Phas.Power
Phase powers
display mode
Enabled
Disabled
Disabled
Disables or enables phase
powers in the main display
Fund.Power
Fundamental
component
display mode
Enabled
Disabled
Disabled
Disables or enables
fundamental values in the
main display
Disp AutoScroll
5

Satec EM133 Specifications

General

Brand	Satec
Model	EM133
Category	Measuring Instruments
Language	English