Satec EM133 User Manual

Chapter 1 General Information Available Options
14 EM13x Series SMART MULTIFUNCTION METER
change events with timestamps (see the EM13X Series MODBUS
Reference Guide)
 1 relay output (standard) and two to four relay outputs (optional)
with 1-cycle update time; unlatched, latched, pulse and KYZ
operation; energy pulses
Display
 Easy to read 2x16 characters LCD display, adjustable update time
 Auto-scroll option with adjustable page exposition time; auto-return
to a default page
 Programmable display auto-scroll sequence
Communications
 Standard 2-wire RS-485 communication port; MODBUS RTU, DNP3,
SATEC ASCII and IEC 60870-5-101 communication protocols
 Optional second communication port; MODBUS RTU, MODBUS/TCP,
DNP3, DNP3/TCP, SATEC ASCII, PROFIBUS DP, CANopen and IEC
60870-5-104 (over TCP) communication protocols
 eXpertPower client for communicating with the SATEC proprietary
eXpertPower Internet services (with the Ethernet/GPRS module)
 TCP notification client for communicating with a remote
MODBUS/TCP server on events or periodically on a time basis (with
the Ethernet/GPRS module)
Meter Security
 Password security for protecting meter setups and accumulated data
from unauthorized changes
Upgradeable Firmware
 Easy upgrading device firmware through a serial or Ethernet port.
Software Support
 PAS™ – meter configuration and data acquisition SATEC Software
tool
 eXpertPower™ – SATEC proprietary Internet services
1.2 Available Options
The EM13X Series can be provided with an optional expansion module
from the following list:
 Digital I/O
 Analog outputs
 Ethernet communication port
 PROFIBUS DP communication port
 CANopen communication port
 RS-232/RS-422/RS-485 communication port
 Cellular communication port based on ENFORA GPRS or TELIT 3G or
4G engine
 RF communication port

Satec EM133 Specifications

General

Brand	Satec
Model	EM133
Category	Measuring Instruments
Language	English