Satel CSP-208 - Terminals; Front Panel

6 CSP-204 ● CSP-208 ● CSP-104 ● CSP-108 SATEL
4.1 Terminals
- protection terminal.
AUX - dedicated output for power supply of CSP-ETH module (two terminals with
indicated polarity).
24 V - power output 24 V (two terminals with indicated polarity).
FIRE TX - fire alarm routing output (two terminals with indicated polarity).
FLT TX - fault warning routing output (two terminals with indicated polarity).
SNDR x - outputs for control of sounders (three terminals for each output) [x – sounder
number].
Zx - zones (three terminals for each zone) [x – zone number].
A, B - communication bus terminals.
COM - common ground.
INx - programmable inputs [x – input number].
NOx - normally open terminal of relay output [x – output number].
Cx - common terminal of relay output [x – output number].
NCx - normally closed terminal of relay output [x – output number].
4.2 Front panel
Fig. 4. CSP-208 control panel's front panel.