SATO HT200e - Page 152

SECTION 9: TROUBLESHOOTING
Page 9-4 SATO HT200e
INTERFACE ERR RS232C Error s RS232C settings.
HEAD ERR Error in head detected. Power off, clean head and replay
power.
HEAD OVERHEATED Head is overheated Switch printer off and let cool
PRINTER H/W ERR Problem in printer hard
ware.
Power off and then back on.
PRESET NO ERR Preset number is not valid Check the preset number and re-
enter.
PRESET FULL Preset data at max capac-
ity
Clear unused preset data
NO DUMP ERR Cannot dump presets No preset data registered.
BLANK PRESET NO Preset number is not reg-
istered.
Check preset number and re-
enter.