Need help?Do you have a question about the SATO HR2 Series and is the answer not in the manual?
General| Power Supply | AC 100-240V, 50/60 Hz |
|---|---|
| Print Method | Thermal transfer and direct thermal |
| Print Speed | 152 mm/sec |
| Media Type | die-cut labels |
| Media Width | 25.4 mm to 114 mm (1 inch to 4.5 inches) |
| Media Thickness | 0.06 mm to 0.19 mm |
| Interfaces | USB, RS232 |
| Supported Barcode Types | Code 39, Code 128, UPC-A, UPC-E, EAN-8, EAN-13, Interleaved 2 of 5, Codabar, MSI, GS1-128, GS1 DataBar, QR Code, Data Matrix, PDF417, MaxiCode |
| Operating Temperature | 5°C to 40°C |
| Storage Temperature | -20°C to 60°C (-4°F to 140°F) |
| Print Resolution | 203 dpi (8 dots/mm) |
| Max. Print Width | 104 mm (4.09 inches) |
Provides an overview of the manual's content and printer setup.
Step-by-step instructions for loading media into the printer.
Step-by-step instructions for loading the carbon ribbon.
Connecting interface and power cables to the printer.
Describes the printer's operational states and their functions.
Accessing settings for print position, darkness, and offset.
Configuring printer settings specific to user preferences.
Setting up and configuring printer interfaces like LAN, USB, RS-232C.
Accessing and configuring advanced printer settings.
Using test prints to identify and resolve specific print problems.
Resetting the printer to its factory default settings.
Accessing service and maintenance functions for printer configuration.
Detailed printer configuration within the service mode menu.
Downloading firmware, fonts, and other data to the printer.
Uploading data from the printer to an SD card.
Common issues and their solutions for print quality problems.
Diagnosing and resolving problems related to printer connectivity.
To Next Page
