Section 3: Operation and Configuration
HR2 Series Operator Manual Page 3-27
3.9 SEMBL MODE
1. During OFFLINE mode, press + and < buttons simultaneously to display the operational icon menu. Press
<, >, + or - buttons to select SEMBL MODE.
2. When SEMBL MODE is displayed, press the FEED button to activate the SEMBL operation.
3. START PROGRAM is first displayed. Press the arrow buttons to specify the start-up program.
NONE: Not specifying start -up program
XXXXXXXX.BAS: Specifying startup program
Program names stored in the main memory will appear in XXXXXXXX.BAS.
The initial value is NONE.
4. Press LINE button to switch between online and offline in SEMBL MODE.
FEED
button
LINE
button
FEED
button
Displaying registered
program name
* Press < or > button to select item
accordingly. The active arrow icons
are displayed on the screen.
+
-
LINE
button
To Next Page
Loading...
