SATO HR2 Series - Operating Modes

Section 3: Operation and Configuration
HR2 Series Operator Manual Page 3-5
3.2 OPERATING MODES
The operating status of this printer can be set within one of the following modes:
1. Normal mode (including ONLINE/OFFLINE modes)
2. Adjustment screen
3. Cancel Print Job mode
4. Printer Setting mode:
• User mode
• Interface mode
• Cartridge mode (Memory Card mode)
• SEMBL mode
• Advanced Mode
•Hex Dump mode
5. Test Print mode
6. Default Setting mode
7. Maintenance mode
8. Service mode
9. Download mode
10.Upload mode
The various modes are accessed by pressing the LINE button, FEED button, + button, - button and <, > arrow
buttons while the printer is Off, On or with certain printer settings in force.