Section 3: Operation and Configuration
HR2 Series Operator Manual Page 3-11
3.5 CANCEL PRINT JOB MODE
1. When the printer is OFFLINE, pressing both the LINE and FEED buttons at the same time will switch the
printer to CANCEL PRINT JOB mode. The menu for canceling the print job then appears.
2. Press , arrow buttons to switch between the selection, YES or NO. The highlight on display indicates
the selected option. The default setting is NO.
If the printer has a print job in memory, selecting YES will cause the job to be cleared.
Notes:
• Be sure you want to cancel the print job before selecting YES as the job cannot be recovered and will
have to re-transmit to the printer.
•Select NO press FEED button to exit the CANCEL PRINT JOB mode without clearing the print data.
3. Press FEED button to activate the selection.
If YES is selected, the message CANCEL PRINT JOB COMPLETED will display with 3 beeps sound and
then goes to ONLINE mode. All the print jobs were cleared from memory.
To Next Page
Loading...
