SATO HR2 Series - Cartridge Mode

Section 3: Operation and Configuration
HR2 Series Operator Manual Page 3-25
3.8 CARTRIDGE MODE
1. During OFFLINE mode, press + and < buttons simultaneously to display the operational icon menu. Press
<, >, + or - buttons to select CARTRIDGE MODE.
2. When CARTRIDGE MODE is displayed, press the FEED button to enter CARTRIDGE MODE.
Note:
PASSWORD may prompt on the display if SET PASSWORD is set to ON in the Service mode. Please
refer to Section 3.16.5 Overview of Setting menu in Service Mode for details in password inputting.
3. SD CARD FORMAT is first prompted. Select YES + FEED button will switch to the next setting options as
shown above. Pressing LINE button, or press and hold LINE button, or select NO + FEED will return to the
CARTRIDGE MODE screen.
FEED
button
LINE
button
* Press < or > button to select item
accordingly. The active arrow icons
are displayed on the screen.
+
-
Displayed only when entry
of PASSWORD is enabled
FEED
button
Select “YES” + FEED
Select “NO”
+ FEED
or
LINE button
or
Press and
hold
LINE button
Select “YES”
+ FEED
Finished
formatting
FEED
button
+
-
The buzzer emits
3 beeps when
formatting is
completed.
Select “NO”
+ FEED
or
LINE button
or
Press and
hold
LINE button