SATO HR2 Series User Manual

Section 3: Operation and Configuration
Page 3-66 HR2 Series Operator Manual
3.17 DOWNLOAD MODE
This download feature allows the operator to download data (firmware, font/logo, True type font), from the
host computer and write in the Flash ROM memory. When downloading is complete, the LCD screen will
return to the original display after three seconds. If an error occurs, a DOWNLOAD DATA ERROR will display
and identify the reason.
CAUTION:
• Downloading firmware will initialize all the previous settings (USER MODE, ADVANCED MODE).
Write down its setting details or keep a copy of FACTORY TEST PRINT for your information in
case you wish to maintain the same settings in the future.
• Do not turn the power on/off while downloading. This may damage the CONT board (main PCB).
Download Font, Logo, TTF
Press < button
+
Switch Power to On “ I ”
Program
download
Go to the next
screen after 3 sec.
Go to the next
screen after 3 sec.
FEED button
Indication of
new entry
Indication of
overwriting
Deletion
Download
completed?
Yes
No
When downloading
the printer
configurations,
verifying step is
skipped.
FEED button
3 short beeps
sound is heard
when the
download is
completed.
Select SD CARD + FEED button
Screen messages are displayed in English regardless of the
setting value on the SELECT LANGUAGE screen.
LINE button
FEED button

SATO HR2 Series Specifications

General

Brand	SATO
Model	HR2 Series
Category	Printer
Language	English