Section 7: Interface Specifications
Page 7-6
HR2 Series Operator Manual
7.4 LOCAL AREA NETWORK (LAN) ETHERNET
7.4.1 Basic Specifications
Interface connector
Cable type: For 10BASE-T and 100BASE-TX
Cable length: 100m or less
Link/Status LED Status LED lights up when establishing the LINK with Ethernet device or when
receiving the packets.
LED Color Description
LINK Green Lights up when establishing LINK
SPEED Yellow Lights off when recognizing the connection
to 10BASE-T.
Lights up when recognizing 100BASE-TX.
To Next Page
Loading...
