SATO HR2 Series - Interface Mode Configurations

Section 3: Operation and Configuration
HR2 Series Operator Manual Page 3-15
3.7 INTERFACE MODE
In this mode, you can set various parameters governing the use of interface cards.
3.7.1 Overview of Interface Mode Configurations
FEED button
FEED
button
LINE
button
FEED
button
LINE
button
Setting contents differ by selected I/F
To the setting of LAN
To the setting of RS-232C
To the setting of USB
LINE
button
Select NO +
FEED button
Select
YES +
FEED
button
LINE
button
Displayed only when entry
of PASSWORD is enabled
Return to INTERFACE MODE menu
* Press <, >, + or - button to select
item or set the value accordingly.
The active arrow icons are displayed
on the screen.
+
-
+
-
FEED
button
LINE
button
Select DATA
PORT +
FEED button
LINE
button
Select SUB
PORT +
FEED button
121(
FEED
button
LINE
button
FEED
button
Press and hold
LINE button
Press and hold
LINE button
Press and hold
LINE button
Press and hold
LINE button
Displayed only in the
case of SUB PORT