SATO HR2 Series User Manual

Section 3: Operation and Configuration
HR2 Series Operator Manual Page 3-51
3.14 DEFAULT SETTING MODE
The printer can be reset to the default setting as in the factory preset.
1. Make sure the Power of the printer is turned off (O).
2. While pressing the LINE button and the FEED button simultaneously, switch the Power to On (I).
3. The printer enters DEFAULT MODE.
DEFAULT SETTING MODE
Menu Description
Select the item to be initialized.
PRINTER SETTING: Initializing printer setting
ALT. PROTOCOL: Initializing protocol code
The initial setting is PRINTER SETTING.
When PRINTER SETTING is selected, the printer displays the DEFAULT
PRINTER SETTING confirmation menu.
When ALT. PROTOCOL is selected, the printer displays the DEFAULT ALT.
PROTOCOL confirmation menu.
DEFAULT PRINTER SETTING confirmation menu.
Selecting YES and pressing FEED button will initialize the printer setting.
The initial setting is NO.
If NO, it goes to DEFAULT MODE without initializing the printer setting.
LINE button
Select ALT.PROTOCOL
+ FEED button
Press LINE + FEED button
+
Switch Power to On “ I ”
Select PRINTER SETTING
+ FEED button
Select YES +
FEED button
Select NO +
FEED button
* Press <, >, + or - button to select item or
set the value accordingly. The active icons
are displayed on the screen.

SATO HR2 Series Specifications

General

Brand	SATO
Model	HR2 Series
Category	Printer
Language	English