SATO HR2 Series - Universal Serial Bus (USB) Interface

Section 7: Interface Specifications
HR2 Series Operator Manual Page 7-5
7.3 UNIVERSAL SERIAL BUS (USB) INTERFACE
The Universal Serial Bus (USB) interface of the print complies with USB2.0 standard.
7.3.1 Basic Specifications
7.3.2 Pin Assignments
Interface connector
Series B plug
Cable length: 5m or less (Twisted Pair Shielded)
Version USB 2.0
Maximum receive
buffer capacity
2.95MB
Pin No. Description
1 VBus
2-Data(D-)
3+Data(D+)
4GND
Buffer near full
Buffer near full
0MB
2.95MB
Remaining 0.95MB
Remaining 1.95MB
occurred
released