Section 3: Operation and Configuration
HR2 Series Operator Manual Page 3-9
3.4 ADJUSTMENT SCREEN
The printer has a quick access to the Adjustment screen for setting the print position, stop position and the
print darkness. These adjustments are in conjunction with the configuration adjustments done in the Service
mode menu and the User mode menu.
1. When the printer is OFFLINE, pressing both the and arrow buttons at the same time will switch the
printer to Adjustment mode. The setting screen is displayed.
2. Press +/- buttons to set the desired value and press FEED button to save the setting and proceed to the
next Adjustment screen.
3. After adjustment, press LINE button to exit the Adjustment screen and returns to OFFLINE mode.
Pressing the LINE button before pressing the FEED button will not save the adjustment.
You may wish to print a test print after completing the adjustments to ensure they are correct. Refer to
Section 3.13 Test Print Mode for details.
To Next Page
Loading...
