Section 3: Operation and Configuration
HR2 Series Operator Manual Page 3-67
3.17 DOWNLOAD MODE (Cont’d)
Preparation:
When downloading from the host computer through the connected interface, ensure the interface is
connected and is set as DATA PORT in the INTERFACE MODE.
When downloading from the SD card, load the appropriate SD card to the printer.
1. Make sure the Power of the printer is turned off (O).
2. While pressing the < arrow button, switch the Power to On (I).
3. The printer enters INTERFACE SELECT mode. Select INTERFACE or SD CARD and press FEED.
4. The printer enters DOWNLOAD READY mode.
5. Send in the data for downloading from the host computer to the printer.
DOWNLOAD MODE
Menu Description
Selecting download method.
INTERFACE: Downloading the program from the interface.
SD CARD: Downloading the program from SD card.
The initial setting is INTERFACE.
For downloading data via the interface using SATO Utilities Tool application on
the host, consult SATO technical support center.
Waiting to receive download data.
This screen displays only when INTERFACE SELECT is set to INTERFACE.
The printer waits to receive the data from the interface selected on the DATA
PORT screen under the interface mode.
The following data will be received from the PC and written to main ROM.
(1) Firmware data
(2) Font / Logo data
(3)TRUETYPE font
When Firmware data is received, it goes to RECEIVING screen.
When Font, Logo and TRUETYPE font are received, it goes to FONT
DOWNLOAD READY screen.
Waiting to receive font data.
This screen displays only when INTERFACE SELECT is set to INTERFACE.
When downloading the font for the first time, it goes to RECEIVING… screen.
To overwrite or delete font data, it goes to DELETING… screen.
Deleting font data.
The gauge shown on the lower portion of screen indicates deleting status of
download data.
To overwrite font data after deleting the font data, it goes to RECEIVING…
screen.
To delete the font data, it goes to FONT DELETE COMPLETED screen.
Receiving download data.
The gauge shown on the lower portion of screen indicates data reception sta-
tus.
After receiving the download data, it goes to WRITING… screen.
To Next Page
Loading...
