SATO HR2 Series - Page 66

Section 3: Operation and Configuration
Page 3-26 HR2 Series Operator Manual
3.8 CARTRIDGE MODE (Cont’d)
CARTRIDGE MODE CONFIGURATION
Menu Description
Confirmation on formatting the storage area of memory card.
YES: Proceed to “SD CARD FORMAT REALLY?” screen.
NO: Return to CARTRIDGE MODE screen.
The initial setting is NO.
Start of formatting the storage area of memory card.
YES: Proceed to start formatting.
NO: Return to CARTRIDGE MODE screen.
The initial setting is NO.
This screen shows the status while formatting the storage area of memory
card.
After formatting the memory card, a completion message will appear.
This screen shows the completion of memory card formatting.
The buzzer emits 3 beeps after formatting is completed.