4
SCAIME Manual : NU-eNod4D-ETH-E-0418_216710-E.docx
12.2.3 Start delay ............................................................................................. 40
12.2.4 Coarse feed effect neutralization time .............................................. 40
12.2.5 Fine feed level ...................................................................................... 40
12.2.6 Fine feed effect neutralization time ................................................... 40
12.2.7 Target weight and in-flight weight ..................................................... 40
12.2.8 Final stabilization time ......................................................................... 41
12.2.9 Tolerances ............................................................................................ 41
12.2.10 End of cycle waiting time ................................................................. 41
12.2.11 Effective end of the cycle ................................................................. 41
12.3 Digital inputs utilization .............................................................................. 41
12.3.1 Start cycle ............................................................................................. 41
12.3.2 Suspend current cycle ........................................................................ 41
12.3.3 Stop cycle ............................................................................................. 41
13 ENODTOUCH – INTERFACE HOMME MACHINE (OPTION) ................................ 42
13.1 Online functioning ...................................................................................... 42
13.1.1 Startup screens ..................................................................................... 42
13.1.2 Multi-eNod screens ............................................................................. 43
13.1.3 Main screen .......................................................................................... 47
13.1.4 Result displaying and storage (eNod4-C, eNod4-D) ....................... 51
13.1.5 Main setup menu ................................................................................. 53
13.2 Dosing setup menu (eNod4-D) ................................................................. 73
13.2.1 Dosing Cycle Setup ............................................................................. 74
13.2.2 Starting conditions setup ..................................................................... 75
13.2.3 Dosing Timing Setup ............................................................................ 76
13.2.4 In-flight correction Settings ................................................................. 77
13.2.5 Flow rate control settings .................................................................... 78
13.2.6 Dosing Tolerance control .................................................................... 79
13.2.7 Dosing Target values ........................................................................... 79
13.2.8 Configuration of Quick Access menu ............................................... 81