Schweitzer Engineering Laboratories SEL-2020 - Page 112

4-30 “Job Done” Examples - (Example 3) Date Code 20010518
SEL-2020 Instruction Manual
2. Define automatic message settings for Port 1 with the SET A command.
Your screen should look like this:
*>>SET A 1<ENTER>
SET A 1<ENTER>SET A 1<ENTER>
SET A 1<ENTER>
Automatic message settings for Port 1
Save Unsolicited Messages (Y/N) AUTOBUF = Y ? <ENTER>
<ENTER><ENTER>
<ENTER>
Port Startup String
STARTUP ="ACC\nOTTER\n2AC\nTAIL\n"
? <ENTER>
<ENTER><ENTER>
<ENTER>
Send operate command on logic bit transition (Y/N) SEND_OPER = N ? <ENTER>
<ENTER><ENTER>
<ENTER>
Auto-message Settings
How many auto-message sequences (0-12) MSG_CNT = 1 ? 2<ENTER>
2<ENTER>2<ENTER>
2<ENTER>
Item 1 trigger D1
ISSUE1 = T01:00:00.0
? <ENTER>
<ENTER> <ENTER>
<ENTER>
Item 1 message
MESG1 = "DATE \RI;01:GLOBAL:MONTH//\RI;01:GLOBAL:DATE//\RI;01:GLOBAL:_YEAR/\n"
? <ENTER>
<ENTER><ENTER>
<ENTER>
Item 1 response parsing method (0=IGNORE,
1=ASCII_INT, 2=ASCII_FLOAT, 3=CHAR_STRING, 4=INT_STRING)PARSE1 = 0 ? <ENTER>
<ENTER><ENTER>
<ENTER>
Time delay to allow response to complete (OFF,ON) DELAY1 = ON ? <ENTER>
<ENTER> <ENTER>
<ENTER>
Item 2 trigger D2
ISSUE2 = NA
? P00:00:01<ENTER>
P00:00:01<ENTER>P00:00:01<ENTER>
P00:00:01<ENTER>
Item 2 message
MESG2 = ""
? 20METER<ENTER>
20METER<ENTER>20METER<ENTER>
20METER<ENTER>
Archive Settings
Enable use of archive data items (Y/N) ARCH_EN = N ? <ENTER>
<ENTER> <ENTER>
<ENTER>
Size of user-defined data space in registers USER = 0 ? <ENTER>
<ENTER><ENTER>
<ENTER>
AUTOBUF = Y
STARTUP ="ACC\nOTTER\n2AC\nTAIL\n"
SEND_OPER=N
MSG_CNT = 2
ISSUE1 = T01:00:00.0
MESG1 = "DATE \RI;01:GLOBAL:MONTH//\RI;01:GLOBAL:DATE//\RI;01:GLOBAL:_YEAR/\n"
PARSE1 = 0
DELAY1 = ON
ISSUE2 = P00:00:01.0
MESG2 = 20METER
ARCH_EN = N
USER = 0
Save changes (Y/N) ? Y<ENTER>
Y<ENTER>Y<ENTER>
Y<ENTER>
Port 1 Settings Changed
*>>

!